Skip to content

Home Office Desk Chairs

Boss Office Products B16245-BK Be Well Medical Spa Drafting Stool : Nice height adjustment!

Pretty but not very comfortable. I was somewhat disappointed with this chair. I ordered it because i needed a drafting height chair and i wanted something prettier than the standard black ones. I was delighted with the beige color and that played a big part of the reason i ordered it. I got it quickly (thanks prime) and also put it together fairly quickly as well. I think it took me around 20 minutes total. The packaging was good, the directions were clear and parts were easy to identify. The chair looks just as it is described, however, i found it to be very uncomfortable. It is certainly not a chair i could sit in for very long. It is high, even at it’s lowest setting, but i expected this because it is a drafting chair/stool.

Good for a work bench, not for long sessions. . It is a nice height for my 42-inch standing desk. Higher than i expected, which is good because you can always lower it. It makes for a good work bench seat but i need something for a computer desk, sitting for hours. I ended up getting a eurotech apollo mesh drafting chair, 23. 7 inch seat height, black (dft9800). Obviously, though there is a cost difference. For about $78 it is a good chair and a good value.

Boss Office Products B16245-BK Be Well Medical Spa Drafting Stool with Back, Black

  • Ergonomic design emulates the natural shape of the spine to increase comfort and productivity
  • Upholstered in durable Caressoft vinyl for easy maintenance and cleaning
  • Adjustable seat height with a 6″ vertical height range
  • Attractive chrome finish on the base, foot ring and gas lift

I spent a lot of time on the internet trying to find a nice chair for my tall workbench, without spending an arm and a leg. I needed something i could sit in for hours without getting tired or sore, and this is the one. I took a chance on b16245-bk, even though i could not find any reviews on it. This chair takes all of ten minutes to assemble, i would say i made the right decision.

Easy to assemble, sturdy and great upholstery material. Overall impression:this is an outstanding stool that is easy to assemble and sturdy. I’ve purchased three, and will soon purchase a fourth. How it works:assembly is required, but is simple and takes about fifteen minutes. Once assembled, the stool will adjust with the use of the lever. I’m delighted with:the quality and sturdiness of the product. The material it is upholstered with is resilient and attractive and easy to keep clean. I am 6′ 275 lbs and i use it daily. My family (all different shapes and sizes) uses them too around our craft table.

Review contains info on height of chair and more details people are asking about. I searched long and hard for a chair to use at my art work station. The max seat height from the floor is 35′ the min is 29′. The max height for your legs to hit the bar/ring is 23′ min is 17′. I didn’t have the back on for the last few months that i had it because we put it together wrong, we fixed it last week and added the back, but i’m not sure i like it on there because it reduces the area of the sitting area if you have a larger bum. Not sure what the max weight is, but i’m a bit over 300# and it works fine for me, i’m also tall (5’9) so reaching the bar isn’t a problem. When it’s at it’s tallest it is a challenge to get in and out as many reviewers stated, my man is constantly worried i’m going to fall and break something when he watches me get on it. I secure the rolly feet against a wall and then hop up and get comphy before rolling over to my work station. Lol there are no locks on the wheels. I typically will sit in it for increments of 1-2 hours and then take a break. I’m an artist so i need to stretch and move around a bit to get kinks out. However even doing that after around 4-5 hours of sitting in it with breaks i get lower back pain. That may be because of the type of work i do and how my body is positioned (hunched over for detail work).

Boss Office Products B16245-BK Be Well Medical Spa Drafting Stool with Back, Black : Its box looked factory damaged with feet of chair with bubble wrap on it sticking out of it with large amount of tape covering it but, stool/chair was undamaged with no wear & tear. Was odd how foot stuck out like that because box was clearly too small for stool/partswent together easy enough. Don’t like that cushion back does not flex backwards so you can lean back some. It stick too far forward imo and makes you sit straight. Seat cushion is thick & decent large size but, kinda uncomfortable for long periods of use, on the hard side. Hem/seams around seat cushion kinda hurts (rubbing kinda hurt) when getting off if you slide off stool. Highest height is perfect to use this stool at a workbench which is what hubby chose it for. Happy with purchase overall, holds 237lb hubby just fine and it was decently priced at under $90.

This has been one sturdy stool that has taken a lot of abuse. It has seen the world on a music tour that lasted over a year. It was thrown into trucks and sea containers, without a case to protect it and it help up, even the fabric.I would stand on the foot ring without a problem (i am about a buck fifty). It served my purpose of giving me support for a 2 hour long show. Yes, some reviews have complained that is it a little unbalanced. But once i found the right spot, i just turned myself to that position and i was good to go. Overall very satisfied by this stool.

This is a very well built chair , far exceeds other chair with a much higher price. Seat is soft , the back support fits into the small of the back and the foot rail is the right height. I’m 5’2 and the height is good. I use this chair for playing guitar and when oil painting. It took about 10 minutes to put together. One of the best buys i’ve made. Thanks amazon update stool to high for 5’2 i only used it for about a month could not sit down on seat even with seat in low position. Had to climb up on rail and try to get on seat. Couldn’t play guitar on stool so thought i could use it in art studio.

Easy to assemble, simple picture directions, all pieces were included and no tools required. The height when fully extended from floor to seat is great for drafting or counter height. Comfortable cushioning and it looks nice.

Good addition to a standing desk. I got this chair because my knees started to hurt from using my standing desk. When opening this package, it came to my surprise at how simple the assembly device was. It gave me a feeling that it wouldn’t be sturdy. Setting up the product wasn’t too difficult. Directions are located on the cardboard box. The cushioning is good, but one thing they do not suggest is to lean back on this chair. I know for some reviewers said this seat was too small. I am about an average sized person (160 lb and 5’9) and its enough space for me. Some things that i don’t like is how the foot rings do not adjust.

Great, quality chair — not a great drafting stool. Very well constructed, but uncomfortable for long periods of use—with this product you are paying for the quality of construction, not the practicality of it. As a professional graphic designer/studio artist, i am always looking for a chair that is comfortable enough to sit in at the drafting table for as long as the project at hand takes (usually hours and hours on end). At first, i was very impressed with the sturdy, all metal construction and quality of the ‘leather’, and i am sure that this chair would work well for everyday medical or desk use, etc. However, as a drafting chair, the seat is very hard and numbs your bottom after an hour or two and there is little back support (the lack of arm rests also eventually adds to the discomfort). Within a few months i could no longer stand it and was already looking into something more ergonomic. Great for average desk use (i still keep this chair around the house), great range in height, very sturdy foot rest, overall great construction, but not a comfortable drafting stool. For those looking for a chair that provides unrestricted support for hunched over creative work, spend the extra $30-$40 on an ergonomic mesh stool.

Great except for that one thing. The darling bride isn’t well, and wanted to get back in the kitchen (no chauvinist jokes from me. But she can’t stand for long periods of time. She asked for a wheeled stool (with footrest) in the kitchen so she could get back to what she did in the navy as a culinary specialist: cook great food. The good: this is exactly what she wanted. Checkthe bad: even at its lowest setting, it’s still too high for her feet to touch the floor properly.

Just like goldilocks said just right. . I have back problems (sciatica) so i have a standing desk. But sometimes i need to sit to switch it up and sit a little bit. I got this because it’s taller than the average desk chair so it works well with my standing desk. I like that it doesn’t have arms so i can pull right up close to the desk edge. The circle foot rest is at just the right height. My husband put it together for me in about 15 minutes. It seems to be made very well for a very affordable price. The seat cushion is pretty ok; it has a little give to it but it’s still firm.

Fantastic chair with easy set up. I recently redid my home office and needed a rolling drafting chair that i could use at my countertop height desk. I didn’t want to spend a fortune on this chair as i don’t work from home all of the time, just occasionally and i also know that my kids would climb on it (and most likely spill on it) so i didn’t want to be upset if it got stained later down the road. After reading through many reviews, i settled on this chair and i will say i was pleasantly surprised when it arrived. It took me less than 10 minutes to set up, it is well padded, and maneuvers fantastically. It is a hair bit darker than i thought it would be judging by the picture, but it still works with my office so no worriesi’d certainly recommend this chair to anyone looking.

Great chair and great value. I use it to take breaks at my standing desk. . I’m very happy with this chair. I use it with my standing desk (which does not easily adjust height). I have adjusted this so when i sit in it, i am the same height as when i stand and it works perfectly. Great for spelling me out when standing is getting exhausting. I can’t believe how simple assembly was. Basically you just stack these pieces, like four screws, and you are done. Super easy and well designed. The seat is very thick and plenty firm and it’s nice to have the bar at the bottom to rest my feet on.

Comfortable, well built workshop chair. I wanted a stool with a back as i tend to use the pc sometimes in the workshop and the backless stool (previously bought in costco for $50) was contributing to my poor posture. The seat height of this chair is adjustable from 28in to 34in. The range tops out higher than the adjustable stool i replacedpros: it’s very comfortable and has thick seat padding for my 6ft 210 lbs frame. It’s all metal construction, except for the back base, seat base, and casters. It took me about 5 mins to assemble, all of it by hand. I would say this chair is built better or at least as as well as a typical office chair for this price range. The leather (like?) material wipes down easily and doesn’t hold on to dust. Cons: this chair is more expensive than a barstool, or a typical branded shop chair you can find at your local tractor supply. It took me awhile to justify purchasing this for the shop but i’m glad i did.

Great chair, but i find the seat a bit on the ‘slippery’ side, albeit very comfortable. Personally, i find the wheeled base to be a nuisance. I changed the wheeled castors for the plain glides that had 3/8′ diameter stems which turned out to be a wee bit too small by about 1/16′, but the problem was solved by wrapping a 1’x 7′ strip of aluminum duct tape around the stem, folding over tightly at top-end and inserting firmly into hole at the bottom of the chair’s base. ~ use a scissors to split the 2′ wide aluminum duct tape down its center. ~ sadly there was nothing in the chair’s description to indicate the actual stem size of replacement castors/glides, which is apparently 7/16′, from what i could determine.

Fantastic chair with easy set up. I recently redid my home office and needed a rolling drafting chair that i could use at my countertop height desk. I didn’t want to spend a fortune on this chair as i don’t work from home all of the time, just occasionally and i also know that my kids would climb on it (and most likely spill on it) so i didn’t want to be upset if it got stained later down the road. After reading through many reviews, i settled on this chair and i will say i was pleasantly surprised when it arrived. It took me less than 10 minutes to set up, it is well padded, and maneuvers fantastically. It is a hair bit darker than i thought it would be judging by the picture, but it still works with my office so no worriesi’d certainly recommend this chair to anyone looking.

Very nice chair for the money. Good padding, solid backrest, bar to place feet on. I use this at tallest position of seat height at 33 3/4′, but when i sit on it, it compresses to 32′ (i am 200 lbs. Still works great for me, but be advised if you’re needed ‘just the right height’. I’m blessed with girth and i notice that the seat cushion feels warm after 30 minutes. It’s not leather, but then again i didn’t pay the price for a leather seat either. The cylinder compression/height control works great.

Great chair and great value. I use it to take breaks at my standing desk. . I’m very happy with this chair. I use it with my standing desk (which does not easily adjust height). I have adjusted this so when i sit in it, i am the same height as when i stand and it works perfectly. Great for spelling me out when standing is getting exhausting. I can’t believe how simple assembly was. Basically you just stack these pieces, like four screws, and you are done. Super easy and well designed. The seat is very thick and plenty firm and it’s nice to have the bar at the bottom to rest my feet on.

Pretty but not very comfortable. I was somewhat disappointed with this chair. I ordered it because i needed a drafting height chair and i wanted something prettier than the standard black ones. I was delighted with the beige color and that played a big part of the reason i ordered it. I got it quickly (thanks prime) and also put it together fairly quickly as well. I think it took me around 20 minutes total. The packaging was good, the directions were clear and parts were easy to identify. The chair looks just as it is described, however, i found it to be very uncomfortable. It is certainly not a chair i could sit in for very long. It is high, even at it’s lowest setting, but i expected this because it is a drafting chair/stool.

Excellent shop chair – no complaints. Nice stool for the workshop. Seat is a little stiff, you can slide off, but once broken in, it should be fine. I’m 220#, this thing is sturdy with me on it. Fit together perfectly, no missing parts, everything is tight. (a little loktite never hurts either) i am loving the wheels that i just purchased for another office chair, and i might just have to upgrade.  propel caster wheels (set of 5) – 3 inch, heavy duty, rollerblade style replacement for home and office chairs – smooth rolling, universal fit – safe on carpet and hardwood flooring.